Latest Cisco IBM HP Oracle certifications batch pdf

Free 70-291 Demo Download

Examsoon offers free demo for MCSE 2003 Security 70-291 Practice exam (Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure). You can check out the interface, question quality and usability of our practice exam before you decide to get it. We are the only one site can offer demo for almost all products.

Free Download 70-291 PDF Practice exam

　
　
Exam : Microsoft 70-291
Title : Implement,Managing and Maintaining a MS Win 2003 Network Infra

1. Your company has two offices.
The network consists of a single Active Directory domain. You have two domain controllers named DC2 and DC3. All servers run Windows Server 2003 Service Pack 2 (SP2). The relevant portion of the network is configured as shown in the exhibit. (Click the Exhibit button.)
You verify the IP configuration of Server1 as shown in the following Command Prompt window.
You need to ensure that Server1 can locate a domain controller if a single server fails.
Which IP configuration should you change on Server1?
A. Add 10.10.0.2 as a DNS server.
B. Add 10.10.0.2 as a WINS server.
C. Add 10.11.0.20 as a WINS server.
D. Add a second network adapter that has an IP address of 10.10.0.20.
Answer: A

2. You have a Web server that runs Windows Server 2003 Service Pack 2 (SP2).
You attempt to start the World Wide Publishing Service and receive the following error message.
You need to identify which services must be started before you can start the World Wide Web Publishing Service.
What should you do?
A. From Event Viewer, view the application log.
B. From Windows Explorer, open the %systemroot%system32driversetcservices file.
C. From the Services snap-in, view the properties of the World Wide Web Publishing Service.
D. From the command prompt, run Net config server /srvcomment:"World Wide Web Publishing Service".
Answer: C

3. Your network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2).
You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.
You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.
You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can connect to Server2 remotely by using Event Viewer.
What should you do on Server2?
A. Add the Administrator account to the HelpServicesGroup.
B. Set the Startup Type for the Remote Registry service to Automatic and then start the service.
C. Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.
D. Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
Answer: B

4. Your network contains a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has an application that runs as a service.
The application fails intermittently. After each failure, you manually restart the service.
You need to ensure that the application starts automatically after a failure.
What should you do?
A. From the Services snap-in, modify the Log On settings of the service.
B. From the Services snap-in, modify the Recovery settings of the service.
C. From the properties of the application executable, set the compatibility mode to Windows 2000.
D. From the properties of the application executable, enable the Allow non-administrators to run this program setting.
Answer: B

5. You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Windows Firewall allows the following ports on Server1:
·53
·110
·135
You plan to install a monitoring server on the network.
You need to ensure that the monitoring server can use Server1 to relay e-mail messages.
You install the SMTP service on Server1.
What should you do next?
A. Install SNMP.
B. Install the POP3 service.
C. Create an exception for TCP port 21 in Windows Firewall.
D. Create an exception for TCP port 25 in Windows Firewall.
Answer: D

6. Your network consists of a single Active Directory domain. The network contains a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has an application that runs as a service. The application uses a domain service account to access other servers in the domain.
Security policies require that users reset their passwords every 30 days. After the application runs for a month, the application fails.
You need to ensure that the application starts and can access the remote servers.
What should you do?
A. In the Services snap-in, set the service to log on as the Local System account and start the service.
B. In the Services snap-in, set the service to log on as the Local Administrator account and start the service.
C. In Active Directory Users and Computers, reset the server’s computer account. In the Services snap-in, start the service.
D. In Active Directory Users and Computers, set the Account Expires option to Never. In the Services snap-in, start the service.
Answer: D

7. Your company has two offices.
All servers run Windows Server 2003 Service Pack 2 (SP2). The relevant portion of the network is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that Server1 can communicate with Web servers on the Internet.
Which default gateway should you assign to Server1?
A. 10.10.10.129
B. 10.10.11.1
C. 131.107.1.1
D. 192.168.1.1
Answer: A

8. You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2).
On Server1, you install an application that runs as a service named App1. App1 will save files to a file share on Server2.
You perform the following actions:
·Create a domain account named App1Service.
·Set the password for App1Service.
·Create a file share on Server2.
·Grant App1Service the Allow – Change share permission.
You need to ensure that App1 can save files to the share on Server2.
What should you do?
A. From the Services snap-in, configure the Log On settings.
B. From the Services snap-in, configure the Recovery settings.
C. From Local Security Policy, disable the Network access: Shares that can be accessed anonymously setting.
D. From Local Security Policy, disable the Network access: Let Everyone permissions apply to anonymous users setting.
Answer: A

9. You have a stand-alone server that runs Windows Server 2003 Service Pack 2 (SP2).
You run the Runas command and receive the following error message: "1058: The service cannot be started, either because it is disabled or has no enabled devices associated with it."
You need to ensure that you can use Runas successfully.
What should you do?
A. Enable the Remote Registry service.
B. Enable the Secondary Logon service.
C. Join the server to an Active Directory domain.
D. From Device Manager, scan for hardware changes.
Answer: B

10. Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2).
You install and configure the DHCP service on a server as show in the exhibit. (Click the Exhibit button.)
You need to ensure that computers can receive IP configurations from the DHCP server.
What should you do?
A. Add a scope option.
B. Add a server option.
C. Authorize the DHCP server.
D. Reconcile the DHCP scope.
Answer: C

11. Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2).
You have a DHCP server that has 10 scopes.
You need to add a DNS server to all 10 scopes by using the minimum amount of administrative effort.
What should you do?
A. In the DHCP snap-in, add a server option.
B. In the DHCP snap-in, add a scope option for each scope.
C. At a command prompt on the server, run the Chcp command and code page 863.
D. At a command prompt on the server, run the Netsh command and configure the popd subcontext.
Answer: A

12. Your company has a main office and plans to open a new branch office.
All servers run Windows Server 2003 Service Pack 2 (SP2).
You assign the network address of 192.168.1.64/26 to the new branch office.
You need to configure the network settings for a server in the branch office.
Which IP address should you use?
A. 192.168.1.10
B. 192.168.1.63
C. 192.168.1.125
D. 192.168.1.200
Answer: C

13. You are the network administrator for your company. The network consists of a single Active Directory domain. The domain contains 35 Windows Server 2003 computers; 3,000 Windows XP Professional computers; and 2,000 Windows 2000 Professional computers.
Windows Server Update Services (WSUS) is installed on a server named Server1. The necessary Group Policy object (GPO) is configured.
You need to confirm whether all computers in the domain have received all approved updates from Server1.
What should you do on Server1?
A. Install and configure Urlscan.exe.
B. At the command prompt, type gpresult /scope COMPUTER.
C. Open the WSUS console. Run the Status of Computers report.
D. Open the WSUS console. Run the Synchronization Results report.
Answer: C

14. You are the network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. All client computers run Windows XP Professional.
You need to implement a new software update infrastructure. You discover that security patches, critical updates, and service packs have never been installed on any client computer on the network.
You install Windows Server Update Services (WSUS) on a Windows Server 2003 computer named Server5. You synchronize and approve all of the current security patches, critical updates, and service packs.
You need to ensure that all client computers receive all Microsoft security patches, critical updates, and service packs.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Open the WSUS console. Select the option to automatically approve WSUS updates.
B. Install the Automatic Updates client on all client computers.
C. Modify the Microsoft Update settings of the Default Domain Controller organizational unit (OU) Group Policy object (GPO) to point client computers to http ://server5.
D. Modify the Microsoft Update settings of the Default Domain Policy Group Policy object (GPO) to point client computers to http: //server5.
E. Open the WSUS console. Create a target group and assign all client computers to the group.
Answer: BD

15. You have an DNS server that runs Windows Server 2003 Service Pack 2 (SP2).
You need to ensure that an e-mail message is sent to the administrator if the DNS server service stops.
You create a script that sends e-mail when the script is executed.
What should you do next?
A. Install the POP3 service on the DNS server.
B. Modify the DNS Server service dependencies.
C. Modify the DNS Server service Recovery options.
D. Install the Universal Description, Discovery, and Integration (UDDI) services on the DNS server.
Answer: C

70-291 Practice exam Description

Credit Toward CertificationWhen you pass Practice exam 70-291: Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure, you complete the requirements for the following certification(s):

Microsoft Certified Technical Specialist: Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure Note This preparation guide is subject to change at any time without prior notice and at the sole discretion of Microsoft.Microsoft exam might include adaptive testing technology and simulation items.Microsoft does not identify the format in which exam are presented. Please use this preparation guide to prepare for the exam, regardless of its format.

We have examsoon 70-291 practice exam,examsoon 70-291 exam,examsoon 70-291 study guide,examsoon 70-291 dumps.and Pass4sure 70-291 exam,Pass4sure 70-291 practice exam,pass4sure 70-291 study guide. and we have Testking 70-291 exam,Testking 70-291 study guide,examsoon 70-291 exam.etc.

Examsoon professional IT Q&As vendors, offer well after-sale service for 70-291 exam. To all the customers buy the real 70-291 exam questions and answers, examsoon provide track service for 70-291 study guides. when you buy the Q&As with in 3 months. you can enjoy the upgrade Q&As service for free with 70-291 practice exam. If in this period, the certified test center change the MCSE 2003 Security 70-291 Exam Q&As, we will update the MCSE 2003 SecurityMCSE 2003 MessagingMCSE 2003MCSEMCSA 2003MCSAMCDBA 70-291 exam Q&As in the first time, and provide you the download update for free